Are you planning to install roller blinds all by yourself? Not sure how exactly you are going to achieve your objective? Well, we are here with a Complete Guide How To Install Roller Blinds Perfectly at your home. By following our guide, you will be able to do everything starting from scratch all by yourself. So, let us have a look at what we have got in store for you.
Fitting a roller blind is not a really difficult task to do. You just need to follow the correct steps and you are good to go. By following the steps mentioned below, you will easily be able to install your roller blind by yourself. You will also be able to find out the correct measurements and spots for the roller blinds installation. Our step will also allow you to install the brackets perfectly in no time. So, let us have a look at the different steps that you need to follow:
Gathering tools and materials: First of all, you need to gather all the tools and materials that are required for the installation of the roller blinds. When you have all your tools, it becomes extremely easy for you to get your job done quickly and easily. A few of the important tools include roller blinds, screws, double-sided tape, electric drill, screwdriver, wall fixing, steel tape, measuring tape, pencil, spirit level, etc. Apart from that, there are also a few other tools that you might require from time to time. Arrange for all the tools before you start the actual process.
Marking the spots: Now you will have to mark the spots on the wall where you would like to fit your roller blinds. You can mark a level line about and beside your window where the roller blinds will be placed. You can also use a scale to draw a proper line. Make sure that the line is completely straight and then mark the screw hole positions on the wall as well. This will make it easier for you to drill the holes using your electric drill.
This is quite a simple task to do and will not require a lot of time to complete the job. However, make sure that you do not drill too close to the brickwork as it might cause harm to the wall. Try maintaining a 50 mm clearance for efficiency and better safety. You can also try using a bradawl if you are trying to attach your roller blinds to the wood.
Install your brackets: Now that everything is in order, what you have to do is that you just need to install the brackets. Make sure that the brackets are in the correct positions. Read the instructions properly and on the basis of that, attach the brackets. Once the brackets are installed, you can install your roller blinds and you are good to go.
And this is a Complete Guide How To Install Roller Blinds. For further information, you can get in touch with us.